loading

Loading, please wait...

Overview

Digital thermometers allow you to take an almost instantaneous temperature sample. Probe diameter has an influence on the response time of the thermometer, typically the thinner the probe the faster the response. All thermometers are completely food safe and suitable for use with your HACCP plan.

An infrared thermometer is a non-contact temperature measurement device. Infrared Thermometers detect the infrared energy emitted by all materials -- at temperatures above absolute zero, (0°Kelvin)-- and converts the energy factor into a temperature reading.

Infrared thermometers only measure surface temperature, to measure core temperature a probe thermometer is required.

Check out our InfraRed Thermometers Fact Sheet for more info on IR thermometers and how to get the most out of your IR thermometer.

Product Photo

WP2 Thermometer


  • Waterproof pocket thermometers
  • -10°C to 200°C/ -50°C to 150°C
  • ±1°C accuracy
  • $35.00 per unit plus delivery and GST

The WP thermometers are a proven performer especially for low-temperature monitoring or temperature verification in wet environments.

With a reading range of -10°C to +200°C (WP) or -50°C to +150°C (WP2), this unit has maximum/minimum memory retention, Fahrenheit or Celsius temperature switching at the touch of a button and a one-hour auto shutoff to preserve battery life.

The stainless probe shaft has been bonded directly the the high impact plastic body for maximum strength and resistance to "working back and forth" of the shaft-body connection with extended heavy use.

The rubber control buttons are easy to press, and the seal against moisture is quite good.

The WP range of thermometers are great for cold rooms, in food service and for warehouses.

  • More info
  • Brochure
Product Photo

Cook/Chill Thermometer


  • Two in one, thermometer and cooking timer
  • High and Low temperature alarms
  • Ensure your cooldown process is accurate
  • $70.00 per unit plus delivery and GST

digital probe thermometer and cooking timer in one unit. High and/or low alarms are able to be set on the food safe thermometer as well. Probe is plug in and replaceable and heavy duty model available.

Temperature range from: -50°C up to +300°C. The easy way to check times with the temperature while cooking product but to also check that the chill or cool-down steps required by the food standards are adhered to.

  • More info
  • Brochure
Product Photo

FlashCheck Jumbo Display Digital Thermometer


  • Super fast needle tip thermometer
  • High visibility display
  • Accurate to ±0.5°C
  • $75.00 per unit plus delivery and GST

The FlashCheck Jumbo Display Digital Probe Thermometer is a fast and accurate tool to use in quality control temperature checking of food and non-food items. The thermometer is IP56-rated waterproofing and has a small diameter probe that is ideal for checking the temperature of "thin masses" of food, such as hamburger patties and chick/fish fillets, as recommended by FDA Food Code 4-302.12(B). The Jumbo Display Digital Probe Digital Thermometer is also compliant with U.S. Public Health Service Food Code 4-203 and HACCP requirements.

Temperature Range: -40°C to 150°C
Accuracy: ±0.5°C (-20°C to 90°C) otherwise ± 1°C
Display: 38mm x 12.7mm LCD

  • More info
  • Brochure
Product Photo

IR8889 Ultra Fast Infrared Thermometer


  • Fast response of 0.5 seconds
  • Laser pointer
  • Wide range from -40°C to 500°C
  • $195.00 per unit plus delivery and GST

Gun Style Infra-red thermometer with a wide temp range. Measures temperatures: -40 up to +500C. Great for food use. FAST response at 0.5 second. Point, pull the trigger and the temperature is displayed - it's that quick! The built-in laser pointer increases target accuracy while the backlight LCD and versatile push-buttons combine for convenient and ergonomic operation. Pocket-sized and easy to use — just point, shoot and read the display!

  • More info
  • Brochure
Product Photo

RT300 Dual Thermometer


  • Measures both Infrared and Core temperature
  • HACCP “Food Zone” LED shows dangerous food temperatures
  • Completely waterproof makes cleaning easy
  • $200.00 per unit plus delivery and GST

The RT-300 Dual Thermometer is very handy because it offers two functions in one: Infra-red measurement as well as a very accurate fold-out probe. Designed for food inspection, it has Food Zone indication: a green light will show if the food measured is less than 4°C or above 60°C. At other temperatures a red light will show.

Measuring the core temperature or the surface temperature of food. For measuring the surface temperature (e.g. food packaging) you are using the infrared sensor and with the immersion probe you are able to measure the core temperature.

  • More info
  • Brochure
Product Photo

Calibration Kit


  • Perform calibration checks in house
  • Can be used with both probe and InfraRed thermometers
  • Meets all food standard requirements for accuracy
  • $330.00 per unit plus delivery and GST

This calibration kit allows you to quickly and accurately check the calibration of most types of thermometers. Checks InfraRed style and probe thermometers with a probe diameter up to 4mm. Meets all food standard requirements for accuracy. This kit includes an 8801 K type thermometer that can be used as a normal thermometer as well. Includes all instructions. Save time and money by doing your own HACCP approved thermometer calibrations in house!

This kit includes an accurate ‘hand held’ thermometer unit that is bonded to an infra-red target unit. The InfraRed thermometer is aimed at the target and the temperature compared to the thermometer that is part of the kit. A hole is provided into the thickest part of the laser target to accommodate most probe thermometers for checking.

  • More info
  • Brochure
Product Photo

Traceable® Refrigerator/Freezer Thermometer


  • Probe is sealed in glycol solution to mimic product temperature
  • Min/max memory
  • High and low settable alarms
  • $100.00 per unit plus delivery and GST

Accurately monitor temperatures in freezers, water baths, heating blocks, incubators, and refrigerators with this enclosed temperature-buffered sensor. Bottle insulates sensor from rapid temperature changes when refrigerator door is opened. Patented unit fulfils all CDC thermometer and vaccine thermometer requirements.

Triple display simultaneously shows high, low, and current temperatures. MIN/MAX monitors high/low readings overnight, on weekends, or for any time period—a significant advantage over current reading-only glass thermometers.

To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). High-impact, chemical-resistant ABS plastic case is 2-3/4 x 4-1/4 x 3/4 inches. Weight is 4 ounces. Supplied with Traceable® Certificate, flip-open stand for lab bench, slot for wall mounting, and Velcro® and magnetic strips to attach bottle unit to any surface. Replacement battery Cat. No. 1111.

Temperature Range: –50°C to 70°C
Accuracy: ±1°C
Resolution:

  • More info
  • Brochure
Product Photo

Min/Max Alarm Thermometer


  • Fridge/Freezer monitoring with display
  • 3m cable with stainless steel probe
  • High and low temperature alarm
  • $78.00 per unit plus delivery and GST

Monitor air temperature levels inside freezers, refrigerators, display cases, water tanks, and coolers with the Min/Max Alarm Digital Thermometer. For a spot check or permanent installation, the Min/Max is an economical and convenient QA tool.

Its onboard internal sensor shows ambient air temperature, while the fast response stainless steel external sensor attached to a 3 meter cord shows the temperature to which it is exposed. Alarms can be set for high and low temperature readings.

Temperature Range: -10°C to 50°C (internal sensor)
Temperature Range: -50°C to 70° (external sensor)
Accuracy: ±1.0°C

  • More info
  • Brochure
Product Photo

Min/Max Thermo Hygrometer


  • Monitor both temperature and humidity
  • Large LCD for easy viewing
  • Maximum and Minimum reading recall
  • $80.00 per unit plus delivery and GST

Check the temperature and relative humidity in hospitals, pharmacies, blood banks, greenhouses, broiler houses, hatcheries, clean rooms and walk-in coolers with the Jumbo Display Thermo-Hygrometer. It features jumbo LCD screen, °F/°C switchable, minimum/maximum readings memory, freeze alarm setting option and external thermistor probe with extension cable.

Temperature Range: 0°C to 50°C (internal sensor)
Temperature Range: -50°C to 70°C (external probe sensor)
Humidity Range: 10% to 99%
Accuracy: ±1.0°C between -40°C to 70°C or ±5% R.H. between 20% to 80% R.H. at 25°C

  • More info
  • Brochure
<